Production and Characteristics of Sandwich Panel Machine by Jinggong Machine

2021-01-29

The complete assembly line of sandwich panels produced by Jinggong consists of feeding mechanisms, gluing, heating, compounding, crimping, grooving, edge trimming, pneumatic, and automatic cutting. It is an indispensable piece of equipment for the production of roof panels and wall panels in industrial plants and warehouses.

The sandwich panel production machinery on the conveyor device includes the lower panel production area, the sandwich filling area, and the upper panel production area from the front to the rear. It is characterized in that the bottom roller of the pressing roller in the lower panel production area is a flat round roller, and the upper roller is a round roller with a concave surface. The bottom roller of the pressing roller in the upper panel production area is a flat round roller, and the upper roller is a round roller with a convex surface.

This machine is a new type of practical sandwich panel machinery. The raw material produced by the sandwich panel machinery in the lower panel production area is rolled by a pressure roller to form a convex surface, and the sandwich material is filled in the filling area; in the upper panel production area, the concave surface is pressed by the pressure roller to form a concave surface. The convex surface corresponds. In this way, the upper and lower panels are combined with the sandwich layer to form a composite panel with grooves on both sides. Along the edge of the composite board obtained by cutting the groove, the centerline is formed into a plug shape, and then a slot is opened on the other opposite side. When the board is connected to the board, the plug side is inserted into the slot side to make the plug connection relatively firm and overcome the wall crack problem caused by the direct seal connection.

Features of sandwich panel machine are as follows:

1. The sandwich panel production line has a beautiful appearance, low noise, and high production efficiency. 　

2. The sandwich panel machinery can not only produce single-laminated panels, but also can produce ordinary I-shaped aluminum composite panels and tongue-and-groove composite panels. One machine has multiple functions. 　　

3. The main machine of the sandwich panel machinery adopts advanced frequency conversion speed regulation, automatic non-stop cutting.

Related Jinggong Machines

Sandwich Panel Line2020/08/03JINGGONG sandwich panel line consists of decoiling system, a cutting & filming system, roll forming machine, preheating system, rockwool system, PU foaming system, double belts system, band-saw cutting system, cooling system, auto-stacking, packing and electrical control system, etc., in our continuous PU/PIR/Rockwool sandwich panel equipment.
PU / PIR Continuous Sandwich Panel Production Line2020/08/03The product of PU / PIR Continuous Sandwich Panel Machine is a new type building material, which has the function such as good flame retarding, keep warm, heat insulation, sound insulation, waterproof, handiness, environmental protection and so on.
Rockwool Continuous Sandwich Panel Production Line2020/08/03The laminating system of Rockwool sandwich panel machine consists of feeding, glue, heating, laminating and post-cutting. The whole machine is under the control of PLC. The line can produce single corrugated sheet, and can also produce the sandwich panel with rabbet joint and corrugated sandwich panel.