What Should Be Paid Attention to Before Starting the Cold Roll Forming Machine?

What should be paid attention to before turning on the cold roll forming machine? Is it unfamiliar to us, or is it the same as a cold bending machine?

The above problems are related to the cold roll forming machine. Unless we know how to understand and control it can we continue to learn. As important as they are, here is some explanation which may help you.

The inspection before starting the cold roll forming machine mainly includes the following, whether each joint is strong, whether there is any looseness, whether each rotating part is sensitive, and whether there is jamming, whether the smoothness of the smooth parts of the equipment is good, whether the amount of oil is sufficient, and whether the smooth oil in each transmission gear box is above the oil gauge line.

After the above inspection, start the slip motor to stop the no-load test run, which is mainly to check whether there is any abnormality. Wait until the empty operation is completed, and then check whether the temperature rise of each rotating part is normal, and whether there is oil leakage. There is also whether the fastener can be tightened. When such problems occur, it should be promptly stopped.

Although the cold roll forming machine and the cold forming machine are similar in literal terms, there are still differences between the two and should not be confused. The cold forming machine is mainly used to stop the processing and manufacturing of the tunnel supporting steel arch frame while the cold forming machine can be directly used in the assembly line. Therefore, their processing levels and emphasis are different.